 |
|
| |
|
|
 |
|
| |
|
|
STANDARD LOCK FORMED IN BOARD |
FLANGE ATTACHMENT |
|
| |
| L-20 SPECIFICATION |
| Capacity |
20 to 26GA(0.5~1.0mm). Uses approximately I" of material |
| Depth of Pocket |
5/16" (8mm) Width of hammer-over edge adjustable up to 3/8" (9.5mm) . |
| Speed |
25 feet per minute. |
| Motor |
1 HP 3 PHASE A.C. Motor. Manual switch. (Single phase motor, optional.) |
| Drive |
V-belt. |
| Stand |
ARC welded steel. Heavy top plate. |
| Feature |
All steel forming head, hardened and ground shafts, Case hardened steel forming rolls, machine cut gear and needle type roller bearing throughout. |
| Dimensions |
36"(915mm) x 16.5"(420mm) x 36.5"(927mm) |
| Shiping Weight |
Approximately 320 lbs(145 kgs) |
|
ALL SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. |
| |
| OPTIONAL ROLLS MOUNTED ON OUTBOARD SHAFTS |
| Rolls |
|
|
|
|
| Double Seam Rolls |
Drive Cleat Rolls |
Flange Attachment |
Right Angle Rolls |
| Capacity |
20-26 GA |
20-26 GA |
20-26 GA |
20-26 GA |
| Approx. Material Used |
1" (25mm) |
2-1/8" (54mm) |
up to 3/16" (5mm) |
up to 3/8" (9.5mm) |
| Size |
3/8" Seam (9.5mm) |
1-1/8" Width (28mm) |
up to 3/16" Height (5mm) |
up to 3/8" Height (9.5mm) |
|
| |
|
|
| |
|
|
|
| |
|
|
